language

Products

Expert in Engineering Plastic Solutions

Home page

Covestro Makrolon Products and Grades

If you have any questions about our Covestro products, or want to ask for Covestro Material physical property datasheet, material safety data certificate MSDS, ROHS inspection report, SGS report, REACH environmental protection certificate, FDA certificate, EU regulatory certificate, UL certificate and factory certificate COC /COA report, etc., please leave us a message through contact us. We will contact you asap!

Covestro Certified Supplier / Support Customized / Factory-Direct Supply

Inquire

Products Recommended

Category:

Hot Sale Grades

Key words:

Characteristic

Easy flowing

Electroplating applications

Food contact quality

Good heat resistance

Good impact strength and excellent chemical resistance

Main physical property

Product Description

If you have any questions about our Covestro Material, or want to ask for Covestro Material physical property datasheet, material safety data certificate MSDS, ROHS inspection report, SGS report, REACH environmental protection certificate, FDA certificate, EU regulatory certificate, UL certificate and factory certificate COC /COA report, etc., please leave s a message through contact us. We will contact you asap!

Characteristic features	Processing and fabrication	Main areas of application
Color Clear and transparent like glass Toughness Without notching, no failure; high notched impact strength Dimensional accuracy and stability Exceptionally high, since it undergoes no change in dimensions due to water absorption and post shrinkage; high creep modulus, high heat resistance, isotropic behavior Heat resistance Glass transition temperature up to 148 °C Flame retardance Flammability classification up to UL 94V0/1.5 mm and UL 94-5VA/3.0 mm; maximum temperature in glow wire test up to 960 °C Electrical insulation Good: volume resistivity 1014 Ohm · m, dielectric strength up to 36 kV/mm (1 mm wall thickness)	Processing the raw material Injection molding, extrusion, extrusion blow molding, injection blow molding and rotomolding Secondary processing Thermoforming, e.g. by bending and stamping; cold forming, e.g. by high-pressure molding and folding Machining Sawing, drilling, turning, milling, planing, filing, tapping, die-cutting and cutting Joining Screwing, bonding and welding Finishing Painting, printing, high-vacuum metallizing and laser marking	Automotive Construction Electrical engineering/electronics Domestic Lighting engineering Medical devices* Optical Optical storage media Safety items Packaging

Characteristic features

Processing and fabrication

Main areas of application

Color
Clear and transparent like glass
Toughness
Without notching, no failure; high notched impact strength
Dimensional accuracy and stability
Exceptionally high, since it undergoes no change in dimensions due to water absorption and post shrinkage; high creep modulus, high heat resistance, isotropic behavior
Heat resistance
Glass transition temperature up to 148 °C
Flame retardance
Flammability classification up to UL 94V0/1.5 mm and UL 94-5VA/3.0 mm; maximum temperature in glow wire test up to 960 °C

Electrical insulation
Good: volume resistivity 1014 Ohm · m, dielectric strength up to 36 kV/mm (1 mm wall thickness)

Processing the raw material

Injection molding, extrusion, extrusion blow molding, injection blow molding and rotomolding
Secondary processing
Thermoforming, e.g. by bending and stamping; cold forming, e.g. by high-pressure molding and folding

Machining
Sawing, drilling, turning, milling, planing, filing, tapping, die-cutting and cutting
Joining
Screwing, bonding and welding
Finishing
Painting, printing, high-vacuum metallizing and laser marking

Automotive
Construction
Electrical engineering/electronics
Domestic
Lighting engineering
Medical devices*
Optical
Optical storage media
Safety items
Packaging

Code	Property	Viscosity	Color	Grade
Makrolon® 2205	MVR (300 °C/1.2 kg) 34 cm³/10 min; general purpose; low viscosity; easy release; injection molding – melt temperature 280–320 °C;	Low viscosity	available in transparent, translucent and opaque colors	General purpose grades
Makrolon® 2207	MVR (300 °C/1.2 kg) 35 cm³/10 min; general purpose; low viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C;	Low viscosity	available in transparent, translucent and opaque colors
Makrolon® 2405	MVR (300 °C/1.2 kg) 19 cm³/10 min; general purpose; low viscosity; easy release; injection molding – melt temperature 280–320 °C;	Low viscosity	available in transparent, translucent and opaque colors
Makrolon® 2407	MVR (300 °C/1.2 kg) 19 cm³/10 min; general purpose; low viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C	Low viscosity	;available in transparent, translucent and opaque colors
Makrolon® 2605	MVR (300 °C/1.2 kg) 12 cm³/10 min; general purpose; medium viscosity; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in transparent, translucent and opaque colors	General purpose grades
Makrolon® 2607	MVR (300 °C/1.2 kg) 12 cm³/10 min; general purpose; medium viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C	Medium viscosity	;available in transparent, translucent and opaque colors
Makrolon® 2805	MVR (300 °C/1.2 kg) 9.0 cm³/10 min; general purpose; medium viscosity; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in transparent, translucent and opaque colors
Makrolon® 2807	MVR (300 °C/1.2 kg) 9.0 cm³/10 min; general purpose; medium viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in transparent, translucent and opaque colors
Makrolon® 3105	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; general purpose; high viscosity; easy release; injection molding – melt temperature 280–320 °C;	High viscosity	available in transparent, translucent and opaque colors	General purpose grades
Makrolon® 3107	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; general purpose; high viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C;	High viscosity	available in transparent, translucent and opaque colors	General purpose grades
Makrolon® 1260	MVR (300 °C/1.2 kg) 34 cm³/10 min; impact modified; low viscosity; easy release; injection molding – melt temperature 280–320 °C	Low viscosity	available in light colors only	Impact modified grades
Makrolon® 1248	MVR (300 °C/1.2 kg) 7.0 cm³/10 min; food contact quality; medium viscosity; impact modified; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in light colors only
Makrolon® 1837	MVR (300 °C/1.2 kg) 11 cm³/10 min; impact modified; medium viscosity; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in opaque colors only
Makrolon® 2467	MVR (300 °C/1.2 kg) 19 cm³/10 min; flame retardant; UL 94V-2/1.5 mm and 3.0 mm; low viscosity; UV stabi - lized; easy release; injection molding – melt tempera - ture 280–320 °C;	Low viscosity	available in transparent, translucent and opaque colors	Flame retardant grades
Makrolon® 6165X	MVR (300 °C/1.2 kg) 28 cm³/10 min; flame retardant; UL 94V-0/1.2 mm; low viscosity; easy release; injec - tion molding – melt temperature 280–320 °C;	Low viscosity	available in opaque colors only; LCD TV frame
Makrolon® 6265X	MVR (300 °C/1.2 kg) 19 cm³/10 min; flame retardant; UL 94V-0/1.5 mm; low viscosity; easy release; injec - tion molding – melt temperature 280–320 °C;	Low viscosity	available in opaque colors only
Makrolon® 6267X	MVR (300 °C/1.2 kg) 19 cm³/10 min; flame retar - dant; UL 94V-0/1.5 mm; low viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C;	Low viscosity	available in opaque colors only
Makrolon® FR6002	MVR (300 °C/1.2 kg) 17 cm³/10 min; flame retardant; low viscosity; easy release; injection molding – melt temperature 280 °C	Low viscosity
Makrolon® 2665	MVR (300 °C/1.2 kg) 12 cm³/10 min; flame retardancy; UL 94V-2/1.5 mm and 3.0 mm; medium viscosity; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in transparent, translucent and opaque colors	Flame retardant grades
Makrolon® 2865	MVR (300 °C/1.2 kg) 10 cm³/10 min; flame retardant; UL 94V-2/1.5 mm and 3.0 mm; medium viscosity; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in transparent, translucent and opaque colors
Makrolon® 6485	MVR (300 °C/1.2 kg) 9.0 cm³/10 min; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; medium viscosity; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in opaque colors only
Makrolon® 6487	MVR (300 °C/1.2 kg) 9.0 cm³/10 min; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; medium viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in opaque colors only
Makrolon® 6555	MVR (300 °C/1.2 kg) 10 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in transparent, translucent and opaque colors
Makrolon® 6557	MVR (300 °C/1.2 kg) 10 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in transparent, translucent and opaque colors
Makrolon® 6717	MVR (300 °C/1.2 kg) 3.0 cm³/10 min; flame retardant; UL 94V-0/2.0 mm; high viscosity; branched; UV stabi - lized; easy release; injection molding – melt tempera - ture 280–320 °C; extrusion;	High viscosity, branched	available in transparent, translucent and opaque colors	Flame retardant grades
Makrolon® 1954	MVR (300 °C/1.2 kg) 18 cm³/10 min; low viscosity; UV stabilized; improved friction characteristics; injection molding – melt temperature 280–320 °C;	——	available in opaque colors only; housing- and operating parts; sliding elements	PC/PTFE grad
Makrolon® 8025	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 20 % glass fiber reinforced; milled fiber; high viscosity; easy release; injection molding – melt temperature 310–330 °C; extrusion;	20 % glass fiber reinforced	available in opaque colors only; precision parts	Glass fiber (milled fiber) reinforced grades
Makrolon® 8035	MVR (300 °C/1.2 kg) 4.0 cm³/10 min; 30 % glass fiber reinforced; milled fiber; high viscosity; easy release; injection molding – melt temperature 310–330 °C; extrusion;	30 % glass fiber reinforced	available in opaque colors only; precision parts	Glass fiber (milled fiber) reinforced grades
Makrolon® 9415	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 10 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; high viscosity; easy release; injection molding – melt temperature 310–330 °C;	10 % Glass fiber	available in opaque colors only	Glass fiber (normal fiber) reinforced grades
Makrolon® 9417	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 10 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm and 5VA/ 3.0 mm; high viscosity; UV stabilized; easy release; injec - tion molding – melt temperature 310–330 °C;	10 % Glass fiber	available in opaque colors only
Makrolon® GF9002	MVR (300 °C/1.2 kg) 15 cm³/10 min; 10 % glass fiber reinforced; flame retardant; UL 94V-0/1.2 mm; low viscosity; easy release; injection molding – melt temperature 310–330 °C;	10 % Glass fiber	available in opaque colors only; electrical/electronic; housing parts with low wall thickness
Makrolon® GF8002	MVR (300 °C/1.2 kg) 10 cm³/10 min; 15 % glass fiber reinforced; medium viscosity; easy release; injection molding – melt temperature 310–330 °C;	15 % Glass fiber reinforced	available in opaque colors only	Glass fiber (normal fiber) reinforced grades
Makrolon® 1095	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 15 % glass fiber reinforced; UL 94V-0/3.0 mm; high viscosity; easy release; injection molding – melt temperature 310–330 °C; extrusion;	15 % Glass fiber reinforced	available in opaque colors only; housings for power tools
Makrolon® GF8001	MVR (300 °C/1.2 kg) 16 cm³/10 min; 20 % glass fiber reinforced; low viscosity; easy release; injection molding – melt temperature 310–330 °C;	20 % Glass fiber reinforced	available in opaque colors only; housing parts
Makrolon® 9125	MVR (300 °C/1.2 kg) 8.0 cm³/10 min; 20 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm; medi - um viscosity; easy release; injection molding – melt temperature 310–330 °C;	20 % Glass fiber reinforced	available in opaque colors only
Makrolon® 9425	MVR (300 °C/1.2 kg) 5.0 cm³/10 min; 20 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; high viscosity; easy release; injection molding – melt temperature 310–330 °C; extrusion;	20 % Glass fiber reinforced	available in opaque colors only
Makrolon® 8345	MVR (300 °C/1.2 kg) 3.0 cm³/10 min; 35 % glass fiber reinforced; high viscosity; easy release; injection molding – melt temperature 310–330 °C; extrusion;	35 % Glass fiber reinforced	available in opaque colors only
Makrolon® OD2015	MVR (250 °C/2.16 kg) 17 cm³/10 min; optical storage media; suitable for all formats; high purity; injection molding – melt temperature 300–350 °C;	Optical storage media	available in color code 000000 only	Grades for special application
Makrolon® LED2045	MVR (250 °C/2.16 kg) 17 cm³/10 min; light guides; PC with highest transmission; low viscosity; easy release; injection molding – melt temperature 260–300 °C;	LED optics and light guides	available in color code 000000 only
Makrolon® LED2245	MVR (300 °C/1.2 kg) 34 cm³/10 min; light guides; optics and lenses; PC with highest transmission; low viscosity; easy release; injection molding – melt temperature 280–320 °C	LED optics and light guides
Makrolon® LED2247	MVR (300 °C/1.2 kg) 35 cm³/10 min; low viscosity; UV stabilized; easy release; LED Lighting, optics and len - ses; injection molding – melt temperature 280–320 °C	LED optics and light guides
Makrolon® LED2643	MVR (300 °C/1.2 kg) 13 cm³/10 min; LED Lighting, optics and lenses; PC with highest transmission; medium viscosity; UV stabilized; injection molding – melt temperature 280–320 °C;	LED optics and light guides	available in color code 551053 only
Makrolon® RW2405	MVR (300 °C/1.2 kg) 19 cm³/10 min; low viscosity; easy release; up to 96 % total reflectance; injection molding	Diffuse reflectors		Grades for special application
Makrolon® RW2407	MVR (300 °C/1.2 kg) 19 cm³/10 min; low viscosity; easy release; UV stabilized; up to 96 % total reflectance; injection molding	Diffuse reflectors
Makrolon® RW6265 X	MVR (300 °C/1.2 kg) 19 cm³/10 min; low viscosity; easy release; flame retardant; UL 94V-0/1.5 mm; up to 96 % total reflectance; injection molding	Diffuse reflectors
Makrolon® RW6267 X	MVR (300 °C/1.2 kg) 19 cm³/10 min; low viscosity; easy release; UV stabilized; flame retardant; UL 94V-0/1.5 mm; up to 96 % total reflectance; injection molding	Diffuse reflectors
Makrolon® TC8010	Polycarbonate (PC), injection molding, thermally conductive, 10 W/mK (ISO 22007-2), for metal replace ment in LED lamps , thermal heat management	Heat sinks		Grades for special application
Makrolon® TC8030	Polycarbonate (PC), injection molding, high thermal conductivity, 22 W/mK (ISO 22007-2), for metal replacement in LED lamps; components for heat dissipation	Heat sinks		Grades for special application
Makrolon® LQ2647	MVR (300 °C/1.2 kg) 12 cm³/10 min; optical lens; medium viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C; available in clear tints only; safety glasses	Optical lenses		Grades for special application
Makrolon® LQ3187	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; optical lens; high viscosity; UV stabilized; UV 400 cut off; easy release; injection molding – melt temperature 280–320 °C; safety glasses; sun glasses	Optical lenses
Makrolon® AL2447	MVR (300 °C/1.2 kg) 19 cm³/10 min; automotive lighting; low viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C; available in clear transparent colors and in various signal colors; headlamp lenses for automotive forward lighting	Automotive lighting
Makrolon® AL2647	MVR (300 °C/1.2 kg) 12 cm³/10 min; automotive lighting; medium viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C; available in clear transparent colors and in various signal colors; headlamp lenses for automotive forward lighting	Automotive lighting
Makrolon® AG2677	MVR (300 °C/1.2 kg) 12 cm³/10 min; medium viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C; available in transparent colors only; automotive glazing; roof modules	Automotive glazing
Makrolon® WB1239	MVR (300 °C/1.2 kg) 2.0 cm³/10 min; blow molding; high viscosity; branched; food contact quality; ex trusion blow molding; injection stretch blow molding; available in transparent colors only; water bottles	Blow molding		Grades for special application
Makrolon® 2807	MVR (300 °C/1.2 kg) 9.0 cm³/10 min; general purpose; medium viscosity; UV stabilized; easy release; injec - tion molding – melt temperature 280–320 °C; available in transparent, translucent and opaque colors	Furniture application
Makrolon® 3107	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; general purpose; high viscosity; UV stabilized; easy release; injection molding – melt temperature 280–320 °C; available in transparent, translucent and opaque colors	Furniture application
Makrolon® ET2613	MVR (300 °C/1.2 kg) 12 cm³/10 min; extrusion; medium viscosity; UV stabilized;	solid sheet	available in color code 550060 only;	Extrusion
Makrolon® ET3113	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; extrusion; high viscosity; UV stabilized;	solid sheet; corrugated sheet	available in transparent colors only;
Makrolon® ET3117	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; extrusion; high viscosity; UV stabilized; easy release;	; multi wall sheets/profiles; corrugat ed sheet	available in color code 550115 only
Makrolon® ET3137	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; extrusion; high viscosity; branched; UV stabilized; easy release;	multi wall sheets/profiles; panels
Makrolon® ET3227	MVR (300 °C/1.2 kg) 3.0 cm³/10 min; extrusion; high viscosity; branched; UV stabilized; easy release;	multi wall sheets/profiles
Makrolon® ET UV110	PC/UV absorber concentrate; high viscosity; easy release; special grade for the coextrusion of Makrolon® ET base resins;	solid sheet; multi wall sheets/profiles	available in color code 550054 only;	Extrusion
Makrolon® ET UV120	PC/UV absorber concentrate; high viscosity; easy release; special grade for the coextrusion of Makrolon® ET base resins;	solid sheet; multi wall sheets/profiles	available in color code 451105 only;
Makrolon® ET UV130	PC/UV absorber concentrate; high viscosity; easy release; special grade for the coextrusion of Makrolon® ET base resins;	solid sheet; multi wall sheets/profiles	available in color code 550054 only;
Makrolon® ET UV510	PC/UV absorber concentrate; high viscosity; easy release; very low plate-out; special grade for the coextrusion of Makrolon® ET base resins;	solid sheet; multi wall sheets/ profiles	available in color code 550054 only;
Makrolon® ET UV530	PC/UV absorber concentrate; high viscosity; easy re - lease; very low plate-out; special grade for the coextru - sion of Makrolon® ET base resins;	solid sheet; multi wall sheets/profiles	available in color code 550054 only;
Makrolon® ET UV540	PC/UV absorber concentrate; high viscosity; easy release; very low plate-out; special grade for the coex - trusion of Makrolon® ET base resins;	solid sheet; multi wall sheets/profiles	available in color code 551307 only;
Makrolon® SF800	MVR (300 °C/1.2 kg) 5.0 cm³/10 min; structural foam; 5 % glass fiber reinforced; flame retardant; high viscosity; easy release; in combination with an appropriate blowing agent for the production of structural foam moldings	Structural foam		Grades for special application
Makrolon® SF800 Z MAS148	MVR (300 °C/1.2 kg) 9.0 cm³/10 min; structural foam; 5 % glass fiber reinforced; milled fiber; flame retardant; medium viscosity; easy release; injection molding; available in natural (opaque) and opaque colors; in combination with an appropriate blowing agent for the production of structural foam moldings	Structural foam		Grades for special application
Makrolon® 2256	MVR (300 °C/1.2 kg) 34 cm³/10 min; food contact quality; low viscosity; easy release; injection molding – melt temperature 280–320 °C;	Low viscosity	available in transparent, translucent and opaque colors	Food contact grades
Makrolon® 2456	MVR (300 °C/1.2 kg) 19 cm³/10 min; food contact quality; low viscosity; easy release; injection molding – melt temperature 280–320 °C;	Low viscosity	available in transparent, translucent and opaque colors
Makrolon® 2656	MVR (300 °C/1.2 kg) 12 cm³/10 min; food contact quality; medium viscosity; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in transparent, translucent and opaque colors
Makrolon® 2856	MVR (300 °C/1.2 kg) 9.0 cm³/10 min; food contact quality; medium viscosity; easy release; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in transparent, translucent and opaque colors
Makrolon® 1248	MVR (300 °C/1.2 kg) 7.0 cm³/10 min; food contact quality; medium viscosity; impact modified; injection molding – melt temperature 280–320 °C;	Medium viscosity	available in light colors only
Makrolon® 3156	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; food contact quality; high viscosity; easy release; injection molding – melt temperature 280–320 °C; extrusion	High viscosity	available in transparent, translucent and opaque colors
Makrolon® WB1239	MVR (300 °C/1.2 kg) 2.0 cm³/10 min; blow molding; high viscosity; branched; food contact quality; extrusion blow molding; injection stretch blow molding;	High viscosity, branched	available in transparent colors only; water bottle
Makrolon® 2258	MVR (300 °C/1.2 kg) 34 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; easy release; injection molding – melt temperature 280–320 °C;	low viscosity;	available in transparent and opaque colors	Medical devices*
Makrolon® 2458	MVR (300 °C/1.2 kg) 19 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; easy release; injection molding – melt temperature 280–320 °C;	low viscosity;	available in transparent and opaque colors
Makrolon® 2558	MVR (300 °C/1.2 kg) 14 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; easy release; injection molding – melt temperature 280–320 °C;	medium viscosity;	available in transparent and opaque colors
Makrolon® 2658	MVR (300 °C/1.2 kg) 12 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; easy release; injection molding – melt temperature 280–320 °C;	medium viscosity;	available in transparent and opaque colors
Makrolon® 2858	MVR (300 °C/1.2 kg) 9.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; easy release; injection molding – melt temperature 280–320 °C;	medium viscosity;	available in transparent and opaque colors
Makrolon® 3108	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; injection molding – melt temperature 280–320 °C;	high viscosity;	available in transparent and opaque colors	Medical devices*
Makrolon® Rx2430	MVR (300 °C/1.2 kg) 19 cm³/10 min; medical devices; suitable for sterilization with high-energy radiation; biocompatible according to many ISO 10993-1 test requirements; injection molding – melt temperature 280–320 °C;	low viscosity;	transparent parts for medical devices
Makrolon® Rx2435	MVR (300 °C/1.2 kg) 23 cm³/10 min; medical devices; suitable for sterilization with high-energy radiation; biocompatible according to many ISO 10993-1 test requirements; easy release; injection molding – melt temperature 280–320 °C	low viscosity;	transparent parts for medical devices
Makrolon® Rx2530	MVR (300 °C/1.2 kg) 15 cm³/10 min; medical devices; suitable for sterilization with high-energy radiation; biocompatible according to many ISO 10993-1 test requirements; injection molding – melt temperature 280–320 °C	medium viscosity;	transparent parts for medical devices
Makrolon® Rx1805	MVR (300 °C/1.2 kg) 6.0 cm³/10 min; medical devices; high lipid resistance; suitable for sterilization with highenergy radiation; biocompatible according to many ISO 10993-1 test requirements; injection molding – melt temperature 280–320 °C;	high viscosity;	transparent parts for medical devices

Resins wholesale，Factory-Direct supply，Certified supplier
Main Product: PC,PC/ABS,PC/PET,PC/PBT
Customized Services: Modified, Color matching, Production technical support
Several Warehouse: Guang zhou, Dong guan, Shen zhen, Hong kong

Get in Touch for More Info! and Speak to Our Manager Today!

Applications