language

Products

Expert in Engineering Plastic Solutions

Home page

Covestro PC Makrolon AL2447 low viscosity,UV stabilized,easy release

Covestro PC Makrolon AL2447 low viscosity,UV stabilized,easy release

Grades / Automotive lighting
MVR (300 °C/1.2 kg) 19 cm³/10 min; Automotive lighting; low viscosity; UV stabilized; easy release; injection molding - melt temperature 280 - 320 °C; available in clear transparent colors and in various signal colors; headlamp lenses for automotive forward lighting

Covestro Certified Supplier / Support Customized / Factory-Direct Supply

Makrolon AL2447

129.9KB

Get Datasheet Get Datasheet

Category:

Key words:

Covestro AL2447

Makrolon AL2447

PC AL2447

Characteristic

Medium viscosity

Easy release

UV stabilized

Main physical property

Rheological properties

Property		Test Condition	Unit	Standard	typical Value
C	Melt volume-flow rate	300 °C/ 1.2 kg	cm³/10 min	ISO 1133	19
	Melt mass-flow rate	300 °C/ 1.2 kg	g/10 min	ISO 1133	20
C	Molding shrinkage, parallel	60x60x2 mm/ 500 bar	%	ISO 294-4	0.65
C	Molding shrinkage, normal	60x60x2 mm/ 500 bar	%	ISO 294-4	0.7
	Molding shrinkage, parallel/normal	Value range based on general practical experience	%	b.o. ISO 2577	0.5-0.7

Mechanical properties (23 °C/50 % r. h.)

Property		Test Condition	Unit	Standard	typical Value
C	Tensile modulus	1 mm/min	MPa	ISO 527-1,-2	2400
C	Yield stress	50 mm/min	MPa	ISO 527-1,-2	66
C	Yield strain	50 mm/min	%	ISO 527-1,-2	6.0
C	Nominal strain at break	50 mm/min	%	ISO 527-1,-2	>50
	Stress at break	50 mm/min	MPa	ISO 527-1,-2	70
	Strain at break	50 mm/min	%	ISO 527-1,-2	130
	Stress at break	50 mm/min	MPa	ISO 527-1,-2	65
	Strain at break	50 mm/min	%	ISO 527-1,-2	120
C	Tensile creep modulus	1 h	MPa	ISO 899-1	2200
C	Tensile creep modulus	1000 h	MPa	ISO 899-1	1900
	Flexural modulus	2 mm/min	MPa	ISO 178	2350
	Flexural strength	2 mm/min	MPa	ISO 178	98
	Flexural strain at flexural strength	2 mm/min	%	ISO 178	7.0
	Flexural stress at 3.5 % strain	2 mm/min	MPa	ISO 178	74
C	Charpy impact strength	23 °C	kJ/m²	ISO 179/1eU	N
	Charpy impact strength	-60 °C/3mm	kJ/m²	ISO 179/1eU	N
	Charpy notched impact strength	23 °C/3mm	kJ/m²	ISO 21305/based on ISO 179/A	65P(C)
	Charpy notched impact strength	-30 °C/3mm	kJ/m²	ISO 21305/based on ISO 179/A	14C
	Izod notched impact strength	23 °C/3mm	kJ/m²	ISO 21305/based on ISO 180/A	65P
	Izod notched impact strength	-30 °C/3mm	kJ/m²	ISO 21305/based on ISO 180/A	15C
C	Puncture impact properties - maximum force	23 °C	N	ISO 6603-2	5100
C	Puncture impact properties - maximum force	-30 °C	N	ISO 6603-2	6000
C	Puncture energy	23 °C	J	ISO 6603-2	55
C	Puncture energy	-30 °C	J	ISO 6603-2	65
	Ball indentation hardness		N/mm²	ISO 2039-1	115

Resins wholesale，Factory-Direct supply，Certified supplier
Main Product: PC,PC/ABS,PC/PET,PC/PBT
Customized Services: Modified, Color matching, Production technical support
Several Warehouse: Guang zhou, Dong guan, Shen zhen, Hong kong

Get in Touch for More Info! and Speak to Our Manager Today!

Applications